The Middie Model is a mid-size hot wire table-top cutter for cutting polystyrene and low density plastics, as well as open cell and closed cell foams.
The 0.2mm diameter wire allows for fine precision cutting, and will heat up to 300C in 2 seconds. Heat intensity can be adjusted with the variable control knob to enable optimum results for speeds and densities of product being cut.
Marked measurements on the platform, and an adjustable guide bar assist in accuracy for straight, and angled cutting. Wire angle can be adjusted left and right and back from vertical to enable the angled cutting. A block-mounted locating pin allows for cutting of diameters of up to 340mm.
Suitable for model making, art projects, and in schools and universities.
Spare wire is included on the spool at the top of the arm, and a spare 10 metre roll is also included with the cutter.
Cutting height is up to 200mm, with reach up to 340mm. Platform dimensions are 580x380mm.
Input Power: 240V; Output DC Power: 12V, 24 watts.
For more options check out our full range of polystyrene cutters and accessories.